Show, Clear, Debug Commands
Page 920 7210 SAS M Services Guide
Sample output
*A:7210-SAS>show>service>id>igmp-snooping# mvr
===============================================================================
IGMP Snooping Multicast VPLS Registration info for service 2
===============================================================================
IGMP Snooping Admin State : Down
MVR Admin State : Down
MVR Policy : None
-------------------------------------------------------------------------------
Local SAPs/SDPs
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num Local
Id State VPLS Groups
-------------------------------------------------------------------------------
2 sap:1/1/1 Up 1 0
2 sap:1/1/4 Up Local 0
-------------------------------------------------------------------------------
MVR SAPs (from-vpls=2)
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num MVR
Id State VPLS Groups
-------------------------------------------------------------------------------
No MVR SAPs found.
===============================================================================
*A:7210-SAS>show>service>id>igmp-snooping#
port-db
Syntax port-db sap sap-id [detail]
port-db sap sap-id group grp-address
port-db sdp sdp-id:vc-id [detail]
port-db sdp sdp-id:vc-id group grp-address
Context show>service>id>igmp-snooping
Description This command displays information on the IGMP snooping port database for the VPLS service.
Parameters group grp-ip-address — Displays the IGMP snooping port database for a specific multicast group
address.
sap sap-id — Displays the IGMP snooping port database for a specific SAP. See Common CLI
Command Descriptions on page 939 for command syntax.
Num Groups Specifies the number of groups learned via this local SAP.
Label Description