Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 926 7210 SAS M Services Guide
static
Syntax static [sap sap-id | sdp sdp-id:vc-id]
Context show>service>id>igmp-snooping
Description This command displays information on static IGMP snooping source groups for the VPLS service.
Parameters sap sap-id — Displays static IGMP snooping source groups for a specific SAP. See Common CLI
Command Descriptions on page 939 for command syntax.
sdp sdp-id — Displays the IGMP snooping source groups for a specific spoke or mesh SDP.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
Output Show Output — The following table describes the show output fields:
Sample Output
*A:MTU-7210# show service id 100 igmp-snooping static
===============================================================================
IGMP Snooping Static Groups for service 100
===============================================================================
-------------------------------------------------------------------------------
IGMP Snooping Static Groups for SAP 1/1/2
-------------------------------------------------------------------------------
Group
-------------------------------------------------------------------------------
228.8.8.8
-------------------------------------------------------------------------------
Static (*,G) entries: 1
===============================================================================
*A:MTU-7210#
statistics
Syntax statistics [sap sap-id | sdp sdp-id:vc-id]
Context show>service>id>igmp-snooping
Description This command displays IGMP snooping statistics for the VPLS service.
Label Description
Source
Displays the IP source address used in IGMP queries.
Group
Displays the static IGMP snooping source groups for a specified SAP.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English