Alcatel-Lucent 7210 SAS M - Page 931

VPLS Clear Commands
7210 SAS M Services Guide Page 931
vc-id — The virtual circuit ID on the SDP ID for which to clear associated FDB entries.
Values sdp-id[:vc-id] sdp-id 1 — 17407
vc-id 1 — 4294967295
sdp-id:vc-id sdp-id 1 — 17407
vc-id 1 — 4294967295
mesh-sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax mesh-sdp sdp-id[:vc-id] ingress-vc-label
Context clear>service>id
Description This command clears and resets the mesh SDP bindings for the service.
Parameters sdp-id — The mesh SDP ID to be reset.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Default All VC IDs on the SDP ID.
Values 1 — 4294967295
spoke-sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax spoke-sdp sdp-id[:vc-id] {all | counters | stp | l2pt}}
Context clear>service>id
Description This command clears and resets the spoke SDP bindings for the service.
Parameters sdp-id — The spoke SDP ID to be reset.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Values 1 — 4294967295
all — Clears all queue statistics and STP statistics associated with the SDP.
counters — Clears all queue statistics associated with the SDP.
stp — Clears all STP statistics associated with the SDP.
l2pt — Clears all L2PT statistics associated with the SDP.