Alcatel-Lucent 7210 SAS M - Page 932

Show, Clear, Debug Commands
Page 932 7210 SAS M Services Guide
sap
Syntax sap sap-id
Context clear>service>statistics
Description This command clears statistics for the SAP bound to the service.
Parameters sap-id — See Common CLI Command Descriptions on page 939 for command syntax.
all — Clears all queue statistics and STP statistics associated with the SAP.
counters — Clears all queue statistics associated with the SAP.
counters
Syntax counters
Context clear>service>statistics>id
Description This command clears all traffic queue counters associated with the service ID.
l2pt
Syntax l2pt
Context clear>service>statistics>id
Description This command clears the l2pt statistics for this service.
mesh-sdp
Syntax mesh-sdp sdp-id[:vc-id] {all | counters | stp | mrp}
Context clear>service>statistics>id
Description This command clears the statistics for a particular mesh SDP bind.
Parameters sdp-id[:vc-id] — sdp-id - [1..17407]
vc-id - [1..4294967295]
all — Clears all queue statistics and STP statistics associated with the SDP.
counters — Clears all queue statistics associated with the SDP.
stp — Clears all STP statistics associated with the SDP.
mrp — Clears all MRP statistics associated with the SDP.