Alcatel-Lucent 7210 SAS M Service Guide

Customer Management Commands
Page 98 7210 SAS M Services Guide
phone
Syntax [no] phone string
Context config>service>customer customer-id
Description This command adds telephone number information for a customer ID.
Default none
The no form of this command removes the phone number value from the customer ID.
Parameters string — The customer phone number entered as an ASCII string string up to 80 characters. If the
string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within
double quotes. Any printable, seven bit ASCII characters may be used within the string.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English