IES Service Configuration Commands
7750 SR OS Services Guide Page 1005
A subscriber profile defines the aggregate QoS for all hosts within a subscriber context. This is done
through the definition of the egress and ingress scheduler policies that govern the aggregate SLA for
subscriber using the subscriber profile. Subscriber profiles also allow for specific SLA profile
definitions when the default definitions from the subscriber identification policy must be overridden.
The no form of the command removes the default SLA profile from the SAP configuration.
Parameters default-sub-profile — Specifies a default subscriber profile for this SAP. The subscriber profile must
be defined prior to associating the profile with a SAP in the config>subscriber-mgmt>sub-
profile context.
sub-ident-policy
Syntax sub-ident-policy sub-ident-policy-name
Context config>service>ies>sub-if>grp-if>sap>sub-sla-mgmt
Description This command associates a subscriber identification policy to this SAP. The subscriber identification
policy must be defined prior to associating the profile with a SAP in the config>subscriber-
mgmt>sub-ident-policy context.
Subscribers are managed by the system through the use of subscriber identification strings. A
subscriber identification string uniquely identifies a subscriber. For static hosts, the subscriber
identification string is explicitly defined with each static subscriber host.
For dynamic hosts, the subscriber identification string must be derived from the DHCP ACK message
sent to the subscriber host. The default value for the string is the content of Option 82 CIRCUIT-ID
and REMOTE-ID fields interpreted as an octet string. As an option, the DHCP ACK message may be
processed by a subscriber identification policy which has the capability to parse the message into an
alternative ASCII or octet string value.
When multiple hosts on the same port are associated with the same subscriber identification string
they are considered to be host members of the same subscriber.
The no form of the command removes the default subscriber identifcation policy from the SAP
configuration.
Default no sub-ident-policy
Parameters sub-ident-policy-name — Specifies a subscriber identification policy for this SAP. The subscriber
profile must be defined prior to associating the profile with a SAP in the config>subscriber-
mgmt>sub-ident-policy context.
multi-sub-sap
Syntax multi-sub-sap [subscriber-limit]
no multi-sub-sap
Context config>service>ies>sub-if>grp-if>sap>sub-sla-mgmt
Description This command configures the maximum number of subscribers for this SAP.
The no form of this command returns the default value.
To Next Page
Loading...
