Internet Enhanced Services
7750 SR OS Services Guide Page 867
Figure 124: IES Spoke-SDP Termination
Figure 124 depicts a spoke SDP terminating directly into an IES. In this case, a spoke SDP could
be tied to an Epipe or HVPLS service. There is no configuration required on the PE connected to
the CE.
Note that all the routing protocols, including multicast, that are supported by IES are supported for
spoke SDP termination.
OSSG188
MPLS/IP
Network
L2 Service
SAP
Spoke SDP
CE
To Next Page
Loading...
