Page 524 7750 SR OS Services Guide
Configuring GSMP Parameters
The following parameters must be configured in order for GSMP to function:
• One or more GSMP sessions
• One or more ANCP policies
• For basic subscriber management only, ANCP static maps
• For enhanced subscriber management only, associate subscriber profiles with ANCP
policies.
Use the following CLI syntax to configure GSMP parameters.
CLI Syntax: config>service>vpls# gsmp
group name [create]
ancp
dynamic-topology-discover
oam
description description-string
hold-multiplier multiplier
keepalive seconds
neighbor ip-address [create]
description v
local-address ip-address
priority-marking dscp dscp-name
priority-marking prec ip-prec-value
[no] shutdown
[no] shutdown
[no] shutdown
This example displays a GSMP group configuration.
A:ALA-48>config>service>vpls>gsmp# info
----------------------------------------------
group "group1" create
description "test group config"
neighbor 10.10.10.104 create
description "neighbor1 config"
local-address 10.10.10.103
no shutdown
exit
no shutdown
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>vpls>gsmp#
To Next Page
Loading...
