Alcatel-Lucent 7750 SR - Modifying Apipe Service Parameters

Page 286 7750 SR OS Services Guide
Modifying Apipe Service Parameters
The following example displays command usage to modify Apipe parameters:
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# apipe 5
A:ALA-41>config>service>apipe# sap 1/1/1:0/32 create
A:ALA-41>config>service>apipe>sap# accounting-policy 2
A:ALA-41>config>service>apipe>sap# exit
A:ALA-41>config>service>apipe# spoke-sdp 1:4
A:ALA-41>config>service>apipe>spoke-sdp# egress
A:ALA-41>config>service>apipe>spoke-sdp>egress# vc-label 16
A:ALA-41>config>service>apipe>spoke-sdp>egress# exit
A:ALA-41>config>service>apipe>spoke-sdp# exit
A:ALA-41>config>service>apipe#
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# apipe 5
A:ALA-42>config>service>apipe# sap 2/2/2:0/32 create
A:ALA-42>config>service>apipe>sap# accounting-policy 2
A:ALA-42>config>service>apipe>sap# exit
A:ALA-42>config>service>apipe# spoke-sdp 1:4
A:ALA-42>config>service>apipe>spoke-sdp# egress
A:ALA-42>config>service>apipe>spoke-sdp>egress# vc-label 16
A:ALA-42>config>service>apipe>spoke-sdp>egress# exit
A:ALA-42>config>service>apipe>spoke-sdp# exit
A:ALA-42>config>service>apipe#
PE Router 1 (ALA-41):
A:ALA-41>config>service# info
-------------------------------------
...
apipe 5 customer 1 create
description "apipe test"
service-mtu 1400
sap 1/1/1:0/32 create
accounting-policy 2
ingress
qos 102
exit
egress
qos 103
exit
exit
spoke-sdp 1:4 create
egress
vc-label 16
exit
no shutdown
exit
...
-------------------------------------
A:ALA-41>config>service#