Virtual Private LAN Services
7750 SR OS Services Guide Page 577
Figure 94: Show Router LDP Session Output
The second command shows the specific LDP service label information broken up per FEC
element type, 128 or 129, basis (Figure 95). The information for FEC element 129 includes the
AGI, SAII and the TAII.
Figure 95: Show Router LDP Bindings FEC-Type Services
Pseudowire Template
The pw-template is defined under the top level service command (config>service# pw-template)
and specifies whether to use an automatically generated SDP or manually configured SDP. It also
provides the set of parameters required for establishing the pseudowire (SDP binding) as
displayed in Figure 96.
PERs6# show router ldp session
LDP Sessions
Peer LDP Id Adj Type State Msg Sent Msg Recv Up Time
1.1.1.134:0 Both Established 21482 21482 0d 15:38:44
No. of Sessions: 1
PERs6# show router ldp bindings fec-type services
LDP LSR ID: 1.1.1.6
Legend: U – Label In Use, N – Label Not In Use, W – Label Withdrawn
S – Status Signaled Up, D – Status Signaled Down
E – Epipe Service, V – VPLS Service, M – Mirror Service
A – Apipe Service, F – Fpipe Service, I – IES Service, R – VPRN service
P – Ipipe Service, C – Cpipe Service
TLV – (Type, Length: Value)
LDP Service FEC 128 Bindings
Type VCId SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
No Matching Entries Found
LDP Service FEC 129 Bindings
AGI SAII TAII
Type SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
65535:100 1.1.1.6 1.1.1.134
V-Eth 100 17406 1.1.1.134 131063U 131067S 1464 1464
No. of FEC 129s: 1
To Next Page
Loading...
