Alcatel-Lucent 7750 SR - Creating a Cpipe Service

Virtual Leased Line Services
7750 SR OS Services Guide Page 249
Creating a Cpipe Service
Use the following CLI syntax to create a Cpipe service. A route distinguisher must be defined in
order for Cpipe to be operationally active.
CLI Syntax: config>service# cpipe service-id [customer customer-id] [vpn
vpn-id] [vc-type {satop-e1 | satop-t1 | cesopsn | cesopsn-cas}] [vc-
switching] [create]
The following displays a Cpipe service configuration example.
*A:ALA-1>config>service# info
----------------------------------------------
...
cpipe 210 customer 1 vc-type cesopsn create
service-mtu 1400
sap 1/5/1.1.3.1 create
exit
spoke-sdp 1:210 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service#