Alcatel-Lucent 7750 SR - Configuring IES SAP ATM Parameters

Internet Enhanced Services
7750 SR OS Services Guide Page 889
Configuring IES SAP ATM Parameters
The following example displays the command usage to create Apipe SAPs:
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# ies 5
A:ALA-41>config>service>ies# sap 1/1/1:0/32 create
A:ALA-41>config>service>ies>sap# ingress
A:ALA-41>config>service>ies>sap>ingress# qos 102
A:ALA-41>config>service>ies>sap>ingress# exit
A:ALA-41>config>service>ies>sap# egress
A:ALA-41>config>service>ies>sap>egress# qos 103
A:ALA-41>config>service>ies>sap>egress# exit
A:ALA-41>config>service>ies>sap# no shutdown
A:ALA-41>config>service>ies>sap# exit
A:ALA-41>config>service>ies#
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# ies 5
A:ALA-42>config>service>ies# sap 2/2/2:0/32 create
A:ALA-42>config>service>ies>sap# ingress
A:ALA-42>config>service>ies>sap>ingress# qos 102
A:ALA-42>config>service>ies>sap>ingress# exit
A:ALA-42>config>service>ies>sap# egress
A:ALA-42>config>service>ies>sap>egress# qos 103
A:ALA-42>config>service>ies>sap>egress# exit
A:ALA-42>config>service>ies>sap# no shutdown
A:ALA-42>config>service>ies>sap# exit
A:ALA-42>config>service>ies#
The following output displays the IES SAP configuration.
PE Router 1 (ALA-41):
A:ALA-41>config>service# info
-------------------------------------
...
ies 5 customer 1 create
description "apipe test"
service-mtu 1400
sap 1/1/1:0/32 create
ingress
qos 102
exit
egress
qos 103
exit
exit
no shutdown
exit
...
-------------------------------------
A:ALA-41>config>service#