Virtual Leased Line Services
7750 SR OS Services Guide Page 241
Basic Configurations
• Creating an Epipe Service on page 253
• Creating an Apipe Service on page 242
• Creating an Fpipe Service on page 265
• Creating an Ipipe Service on page 270
• Using Spoke SDP Control Words on page 274
• Pseudowire Configuration Notes on page 277
→ Configuring Two VLL Paths Terminating on T-PE2 on page 279
→ Configuring VLL Resilience on page 282
→ Configuring VLL Resilience for a Switched Pseudowire Path on page 283
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure the VLL
services and provides the CLI commands.
• Associate the service with a customer ID.
• Define SAP parameters
→ Optional - configure ATM parameters
→ Optional - select egress and ingress QoS and/or scheduler policies (configured in the
config>qos context).
→ Optional - select accounting policy (configured in the config>log context).
• Define spoke SDP parameters.
• Enable the service.
To Next Page
