Alcatel-Lucent 7750 SR - Configuring SAP Subscriber Management Parameters

Page 538 7750 SR OS Services Guide
Configuring SAP Subscriber Management Parameters
Use the following CLI syntax to configure subscriber management parameters on a VPLS service
SAP. The policies and profiles that are referenced in the def-sla-profile, def-sub-profile, non-
sub-traffic, and sub-ident-policy commands must already be configured in the config>subscr-
mgmt context.
CLI Syntax: config>service>vpls service-id
sap sap-id [split-horizon-group group-name]
sub-sla-mgmt
def-sla-profile default-sla-profile-name
def-sub-profile default-subscriber-profile-name
mac-da-hashing
multi-sub-sap [number-of-sub]
no shutdown
single-sub-parameters
non-sub-traffic sub-profile sub-profile-name sla-
profile sla-profile-name [subscriber sub-ident-
string]
profiled-traffic-only
sub-ident-policy sub-ident-policy-name
The following example displays a subscriber management configuration:
A:ALA-48>config>service>vpls#
----------------------------------------------
description "Local VPLS"
stp
shutdown
exit
sap 1/2/2:0 create
description "SAP for local service"
sub-sla-mgmt
def-sla-profile "sla-profile1"
sub-ident-policy "SubIdent1"
exit
exit
sap 1/1/5:0 create
description "SAP for local service"
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>vpls#