Alcatel-Lucent 7750 SR - Deleting an Apipe Service

Page 290 7750 SR OS Services Guide
Deleting an Apipe Service
An Apipe service cannot be deleted until the SAP is shut down. If protocols and/or a spoke-SDP
are defined, they must be shut down and removed from the configuration as well.
Use the following CLI syntax to delete Apipe services:
CLI Syntax: config>service#
no apipe service-id
shutdown
no sap sap-id
shutdown
no spoke-sdp [sdp-id:vc-id]
shutdown
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# apipe 5
A:ALA-41>config>service>apipe# sap 1/1/1:0/32
A:ALA-41>config>service>apipe>sap# shutdown
A:ALA-41>config>service>apipe>sap# exit
A:ALA-41>config>service>apipe# no sap 1/1/1:0/32
A:ALA-41>config>service>apipe# spoke-sdp 1:4
A:ALA-41>config>service>apipe>spoke-sdp# shutdown
A:ALA-41>config>service>apipe>spoke-sdp# exit
A:ALA-41>config>service>apipe# no spoke-sdp 1:4
A:ALA-41>config>service>apipe# shutdown
A:ALA-41>config>service>apipe# exit
A:ALA-41>config>service# no apipe 5
PE router 2 (A:ALA-42):
Example: A:ALA-41>config>service# apipe 5
A:ALA-41>config>service>apipe# sap 2/2/2:0/32
A:ALA-41>config>service>apipe>sap# shutdown
A:ALA-41>config>service>apipe>sap# exit
A:ALA-41>config>service>apipe# no sap 2/2/2:0/32
A:ALA-41>config>service>apipe# spoke-sdp 1:4
A:ALA-41>config>service>apipe>spoke-sdp# shutdown
A:ALA-41>config>service>apipe>spoke-sdp# exit
A:ALA-41>config>service>apipe# no spoke-sdp 1:4
A:ALA-41>config>service>apipe# shutdown
A:ALA-41>config>service>apipe# exit
A:ALA-41>config>service# no apipe 5