Alcatel-Lucent 7750 SR - Configuring ETH-CFM Parameters

Services
7750 SR OS Services Guide Page 115
Configuring ETH-CFM Parameters
The following example displays an 802.1ag configuration.
*A:sr7_A>config>eth-cfm# info
----------------------------------------------
domain 1 name "1" level 1
association 1 format string name "1"
bridge-identifier 50
exit
ccm-interval 1
exit
association 2 name "1345"
bridge-identifier 100
exit
ccm-interval 60
remote-mepid 2
remote-mepid 3
exit
exit
----------------------------------------------
*A:sr7_A>config>eth-cfm#
*A:sr7_A>config>service# info
----------------------------------------------
ies 50 customer 1 vpn 50 create
description "Default Ies description for service id 50"
interface "ies-50-9.9.9.1" create
address 9.9.9.1/24
sap 2/2/1:20 create
description "sap-50-9.9.9.1"
eth-cfm
mep 1 domain 1 association 1 direction down
no shutdown
exit
exit
exit
exit
no shutdown
exit
customer 1 create
description "Default customer"
exit
exit
vpls 100 customer 1 b-vpls create
stp
shutdown
exit
eth-cfm
mep 123 domain 1 association 2
ccm-enable
no shutdown
exit
exit
no shutdown