Alcatel-Lucent 7750 SR - Same Fate Epipe Vlans Access Protection

Virtual Leased Line Services
7750 SR OS Services Guide Page 275
Same Fate Epipe VLANs Access Protection
The following displays a G.8031 Ethernet Tunnel for Epipe protection configuration example
using same-fate SAPs for each Epipe access (two ethernet member ports 1/1/1 and 2/1/1/1 are
used):
*A:7750_ALU>config>eth-tunnel 1
----------------------------------------------
description "Protection is APS"
protection-type 8031_1to1
ethernet
mac 00:11:11:11:11:12
encap-type dot1q
exit
ccm-hold-time down 5 up 10 // 50 ms down, 1 second up
path 1
member 1/1/1
control-tag 5 // primary control vlan 5
precedence primary
eth-cfm
mep 2 domain 1 association 1
ccm-enable
control-mep
no shutdown
exit
exit
no shutdown
exit
path 2
member 2/1/1
control-tag 105 //secondary control vlan 105
eth-cfm
mep 2 domain 1 association 2
ccm-enable
control-mep
no shutdown
exit
exit
no shutdown
exit
no shutdown
--------------------------------------------------
# Configure Ethernet tunnel SAPs
--------------------------------------------------
*A:7750_ALU>config>service epipe 10 customer 5 create
sap eth-tunnel-1 create // Uses control tags from the Ethernet tunnel port
description "g8031-protected access ctl/data SAP for eth-tunnel 1"
exit
no shutdown
----------------------------------------------
*A:7750_ALU>config>service epipe 11 customer 5 create
sap eth-tunnel-1:1 create
description "g8031-protected access same-fate SAP for eth-tunnel 1"
// must specify tags for each corresponding path in Ethernet tunnel port
eth-tunnel path 1 tag 6
eth-tunnel path 2 tag 106
exit
…