Alcatel-Lucent 7750 SR - Figure 86: Example Configuration for Protected VPLS SAP

Page 554 7750 SR OS Services Guide
Figure 86: Example Configuration for Protected VPLS SAP
Use the following CLI syntax to create a management VPLS:
CLI Syntax: config>service# sdp sdp-id mpls create
far-end ip-address
lsp lsp-name
no shutdown
CLI Syntax: vpls service-id customer customer-id [m-vpls] create
description description-string
sap sap-id create
managed-vlan-list
range vlan-range
mesh-sdp sdp-id:vc-id create
stp
no shutdown
The following example displays a VPLS configuration:
*A:ALA-1>config>service# info
----------------------------------------------
...
sdp 300 mpls create
far-end 10.0.0.20
lsp "toALA-A2"
no shutdown
exit
vpls 1 customer 1 m-vpls create
sap 1/1/1:1 create
ESSMTU
STP
ALA-1
ALA-2
M
M
M
M
M
M
1/1
1/21
2
1/3
1/3
1/1:1
1/1:1
300:1
300:1
SDP 300
1/1:100
1/1:100
1/3
SAP
SAP
SAP
SAP
SAP
MTU runs STP
in VLAN 1
= vpls 1 (m-vpls)
= vpls 10 (user vpls)
OSSG047