Alcatel-Lucent 7750 SR - Common Service Commands

Common Service Commands
Page 1934 7750 SR OS Services Guide
Common Service Commands
SAP synt ax
sap
Syntax [no] sap sap-id
Description This command specifies the physical port identifier portion of the SAP definition.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition.
The sap-id can be configured in one of the following formats:
Type Syntax Example
port-id slot/mda/port[.channel] 1/1/5
null [port-id | bundle-id| bpgrp-id | lag-id | aps-id] port-id: 1/1/3
bundle-id: bundle-ppp-1/1.1
bpgrp-id: bpgrp-ima-1
lag-id: lag-3
aps-id: aps-1
dot1q [port-id | bundle-id| bpgrp-id | lag-id | aps-id]:qtag1 port-id:qtag1: 1/1/3:100
bundle-id: bundle-ppp-1/1.1
bpgrp-id: bpgrp-ima-1
lag-id:qtag1:lag-3:102
aps-id:qtag1: aps-1:27
qinq [port-id | bpgrp-id | lag-id]:qtag1.qtag2 port-id:qtag1.qtag2: 1/1/3:100.10
bpgrp-id: bpgrp-ima-1
lag-id:qtag1.qtag2: lag-10:
atm [port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2] port-id: 1/1/1
aps-id: aps-1
bundle-id: bundle-ima-1/1.1
bundle-ppp-1/1.1
bpgrp-id
: bpgrp-ima-1
vpi/vci: 16/26
vpi: 16
vpi1.vpi2: 16.200
frame-
relay
[port-id | aps-id ]:dlci port-id: 1/1/1:100
bundle-id: bundle-fr-3/1.1:100
aps-id: aps-1
dlci: 16
cisco-hdlc slot/mda/port.channel port-id: 1/1/3.1