VLL Clear Commands
7750 SR OS Services Guide Page 1569
VLL Clear Commands
id
Syntax id service-id
Context clear>service
clear>service>statistics
Description This command clears commands for a specific service.
Parameters service-id — The ID that uniquely identifies a service.
Values service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
arp
Syntax arp
Context clear>service>id
Description This command clears all ARP entries. This command is only valid for Ipipe services.
host-tracking
Syntax host-tracking [sap sap-id] [host ip-address]
Context clear>service>id
Description This command clears host tracking data.
mesh-sdp
Syntax mesh-sdp sdp-id[:vc-id] ingress-vc-label
Context clear>service>id
Description This command clears and reset sthe mesh SDP binding.
Parameters sdp-id — The spoke SDP ID for which to clear statistics.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Values 1 — 4294967295
ingress-vc-label — Specifies to clear the ingress VC label.
To Next Page
Loading...
