Alcatel-Lucent 7750 SR - Page 1570

Show, Clear, Debug Commands
Page 1570 7750 SR OS Services Guide
spoke-sdp
Syntax spoke-sdp sdp-id:vc-id ingress-vc-label
Context clear>service>id
Description This command clears and resets the spoke SDP bindings for the service.
Parameters sdp-id — The spoke SDP ID to be reset.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Values 1 — 4294967295
ingress-vc-label — Specifies to clear the ingress VC label.
sap
Syntax sap sap-id {all | counters | stp}
Context clear>service>statistics
Description This command clears SAP statistics for a SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
all — Clears all SAP queue statistics and STP statistics.
counters — Clears all queue statistics associated with the SAP.
stp — Clears all STP statistics associated with the SAP.
sdp
Syntax sdp sdp-id keep-alive
Context clear>service>statistics
Description This command clears keepalive statistics associated with the SDP ID.
Parameters sdp-id — The SDP ID for which to clear keepalive statistics.
Values 1 — 17407