Alcatel-Lucent 7750 SR - Deleting an Fpipe Service

Virtual Leased Line Services
7750 SR OS Services Guide Page 299
Deleting an Fpipe Service
An Fpipe service cannot be deleted until the SAP is shut down. If protocols and/or a spoke-SDP
are defined, they must be shut down and removed from the configuration as well.
Use the following CLI syntax to delete a Fpipe service:
CLI Syntax: config>service#
no fpipe service-id
shutdown
no sap sap-id
shutdown
no spoke-sdp [sdp-id:vc-id]
shutdown
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# sap 1/1/1:0/32
A:ALA-41>config>service>fpipe>sap# shutdown
A:ALA-41>config>service>fpipe>sap# exit
A:ALA-41>config>service>fpipe# no sap 1/1/1:0/32
A:ALA-41>config>service>fpipe# spoke-sdp 1:1
A:ALA-41>config>service>fpipe>spoke-sdp# shutdown
A:ALA-41>config>service>fpipe>spoke-sdp# exit
A:ALA-41>config>service>fpipe# no spoke-sdp 1:1
A:ALA-41>config>service>fpipe# shutdown
A:ALA-41>config>service>fpipe# exit
A:ALA-41>config>service# no fpipe 1
PE router 2 (A:ALA-42):
Example: A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# sap 2/1/1.1:16
A:ALA-41>config>service>fpipe>sap# shutdown
A:ALA-41>config>service>fpipe>sap# exit
A:ALA-41>config>service>fpipe# no sap 2/1/1.1:16
A:ALA-41>config>service>fpipe# spoke-sdp 1:1
A:ALA-41>config>service>fpipe>spoke-sdp# shutdown
A:ALA-41>config>service>fpipe>spoke-sdp# exit
A:ALA-41>config>service>fpipe# no spoke-sdp 1:1
A:ALA-41>config>service>fpipe# shutdown
A:ALA-41>config>service>fpipe# exit
A:ALA-41>config>service# no fpipe 1