Alcatel-Lucent 7750 SR - Configuring VPRN Protocols - PIM

Configuring a VPRN Service with CLI
Page 1106 7750 SR OS Services Guide
Configuring VPRN Protocols - PIM
Refer to VPRN Services Command Reference on page 1123 for CLI syntax to configure VPRN
parameters.
The following example displays a VPRN PIM configuration:
config>service# info
#------------------------------------------
...
vprn 1 customer 2 create
route-distinguisher 1:11
interface "if1" create
address 12.13.14.15/32
loopback
exit
interface "if2" create
address 14.14.14.1/24
sap 1/1/2:0 create
exit
exit
pim
interface "if1"
exit
interface "if2"
exit
rp
static
exit
bsr-candidate
shutdown
exit
rp-candidate
shutdown
exit
exit
exit
no shutdown
exit
exit
#------------------------------------------
config>service#