Alcatel-Lucent 7750 SR - ETH-CFM Configuration on MTU1

Configuration Examples
Page 822 7750 SR OS Services Guide
ETH-CFM Configuration on MTU1
This section describes the required configuration on MTU1 for the maintenance association
between MEP 51 and MEP 56.
*A:alcmtu1-R6>config>eth-cfm# info
----------------------------------------------
domain 1 name "ivpls" level 4
association 1 format string name "ivpls"
bridge-identifier 5000
mhf-creation explicit
exit
ccm-interval 1
remote-mepid 51
exit
exit
----------------------------------------------
*A:alcag1-R6>config>eth-cfm#
*A:alcmtu1-R6# configure service vpls 5000
*A:alcmtu1-R6>config>service>vpls# info
----------------------------------------------
send-flush-on-failure
send-flush-on-failure-into-bvpls
backbone-vpls 10000
exit
stp
shutdown
exit
sap lag-5:5 create
eth-cfm
mep 56 domain 1 association 1 direction up
ccm-enable
low-priority-defect allDef
mac-address 00:AF:AF:AF:AF:AF
no shutdown
exit
exit
exit
no shutdown
----------------------------------------------