Configuration Examples
Page 820 7750 SR OS Services Guide
precedence primary
eth-cfm
mep 51 domain 1 association 1 direction down
ccm-enable
low-priority-defect allDef
mac-address 00:AE:AE:AE:AE:AE
control-mep
no shutdown
no shutdown
path 2
member 2/2/2
control-tag 200
eth-cfm
mep
mep 52 domain 1 association 2 direction down
ccm-enable
low-priority-defect allDef
mac-address 00:BE:BE:BE:BE:BE
control-mep
no shutdown
no shutdown
config service vpls 1 b-vpls
sap eth-tunnel-1
config service epipe 1000
pbb-tunnel 1 backbone-dest-mac remote-beb
sap 3/1/1:400.10
PBB MAC Flush
This section describes a configuration example for PBB MAC Flush in an I-VPLS:
CLI Syntax: config>service# vpls 2000 customer 6 i-vpls create
description “This is an I-VPLS.”
sap 4/1/3:20 create
description “I-VPLS SAP”
spoke-sdp 5:32 create
description “I-VPLS SDP”
backbone-vpls 200
send-bvpls-flush all-from-me
MC-LAG Multihoming for Native PBB
This section describes a configuration example for BEB C configuration given the following
assumptions:
To Next Page
Loading...
