Alcatel-Lucent 7750 SR - Page 819

Virtual Private LAN Services
7750 SR OS Services Guide Page 819
exit
mst-instance 20
mst-priority 8192
vlan-range 200-299
exit
no shutdown
exit
sap eth-tunnel-1 create // BSAP0 to BCB E
sap 4/1/1:0 create // physical link to BCB F (NOTE 0 or 0.*)
// indicate untagged for m-VPLS)
exit
no shutdown
---------------------------------------------------
# Service config: one of the same-fate SAP over
# loadsharing tunnel
---------------------------------------------------
A:7750_ALU>config service vpls 100 customer 1 b-vpls create
sap eth-tunnel-1:1 create //to BCB E
// must specify tags for each path for loadsharing
eth-tunnel
path 1 tag 100
path 2 tag 100
path 3 tag 100
exit
no shutdown …
sap 3/1/1:200 // to BCBF
…
A:7750_ALU>config service vpls 1000 customer 1 i-vpls create
pbb backbone-vpls 100 isid 1000
sap 4/1/1:200 // access SAP to QinQ
…
--------------------------------------------------
# Service config: one of epipes into b-VPLS protected tunnel
# as per R7.0 R4
--------------------------------------------------
A:7750_ALU>config service service vpls 3 customer 1 b-vpls create
sap eth-tunnel-3 create
…
service epipe 2000
pbb-tunnel 100 backbone-dest-mac to-AS20 isid 2000
sap 3/1/1:400 create
CLI Syntax:
port 1/1/1
ethernet
encap-type dot1q
port 2/2/2
ethernet
encap-type dot1q
config eth-tunnel 1
path 1
member 1/1/1
control-tag 100