Alcatel-Lucent 7750 SR - Modifying Ipipe Service Parameters

Page 300 7750 SR OS Services Guide
Modifying Ipipe Service Parameters
The following example displays command usage to modify Ipipe parameters:
Example: config>service# ipipe 202
config>service>ipipe# sap 1/1/2:444
config>service>ipipe>sap# shutdown
config>service>ipipe>sap# exit
config>service>ipipe# no sap 1/1/2:444
config>service>ipipe# sap 1/1/2:555 create
config>service>ipipe>sap$ description “eth_ipipe”
config>service>ipipe>sap$ ce-address 31.31.31.1
config>service>ipipe>sap$ no shutdown
config>service>ipipe>sap$ exit
config>service>ipipe# info
A:ALA-48>config>service# info
----------------------------------------------
...
ipipe 202 customer 1 create
sap 1/1/2:445 create
description "eth_ipipe"
ce-address 31.31.31.2
exit
sap 1/1/2:555 create
description "eth_ipipe"
ce-address 31.31.31.1
exit
no shutdown
exit
...
----------------------------------------------
A:ALA-48>config>service#