Alcatel-Lucent 7750 SR - Configuring IES Subscriber Interface Parameters

Internet Enhanced Services
7750 SR OS Services Guide Page 885
Configuring IES Subscriber Interface Parameters
NOTE: Subscriber interfaces operate only with basic (or enhanced) subscriber managment. At the
very least, a host, either statically configured or dynamically learned by DHCP must be present in
order for the interface to be useful.
Refer to IES Services Command Reference on page 897 for CLI syntax to configure IES
subscriber interface parameters.
The following example displays a subscriber interface configuration:
A:ALA-48>config>service>ies>sub-if# info
----------------------------------------------
address 143.144.140.1/24
group-interface "abc-if" create
sap 1/1/19:0 create
ingress
qos 2
filter ip 10
exit
static-host ip 143.144.145.100 mac 00:01:00:00:00:01 create
exit
exit
exit
----------------------------------------------
A:ALA-48>config>service>ies>sub-if#