Alcatel-Lucent 7750 SR - Creating an Fpipe Service

Virtual Leased Line Services
7750 SR OS Services Guide Page 265
Creating an Fpipe Service
Use the following CLI syntax to create an Fpipe service.
CLI Syntax: config>service# fpipe service-id [customer customer-id] [vpn
vpn-id] [vc-type {fr-dlci}][vc-switching]
description description-string
service-mtu octets
no shutdown
The following example displays the command usage to create an Fpipe service:
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# fpipe 1 customer 1 create
A:ALA-41config>service>fpipe# description “fpipe test”
A:ALA-41config>service>fpipe# service-mtu 1400
A:ALA-41config>service>fpipe# no shutdown
A:ALA-41config>service>fpipe#
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# fpipe 1 customer 1 create
A:ALA-42>config>service>fpipe# description “fpipe test”
A:ALA-42>config>service>fpipe# service-mtu 1400
A:ALA-42>config>service>fpipe# no shutdown
A:ALA-42>config>service>fpipe#
The following example displays the Fpipe service creation output.
PE router 1 (A:ALA-41):
A:ALA-41>config>service# info
-------------------------------------------
...
fpipe 1 customer 1 create
description “fpipe test”
service-mtu 1400
no shutdown
exit
...
-------------------------------------------
A:ALA-41>config>service#
PE router 2 (A:ALA-42):
A:ALA-42>config>service# info
-------------------------------------------
...
fpipe 1 customer 1 create
description “fpipe test”
service-mtu 1400
no shutdown
exit
...
-------------------------------------------
A:ALA-42>config>service#