Alcatel-Lucent 7750 SR - Page 266

Page 266 7750 SR OS Services Guide
Configuring Fpipe SAP Parameters
Fpipe SAP
Use the following CLI syntax to configure Fpipe SAP parameters.
CLI Syntax: config>service# fpipe service-id [customer customer-id] [vpn
vpn-id] [vc-type {fr-dlci}] [vc-switching]
sap sap-id
accounting-policy acct-policy-id
collect-stats
description description-string
egress
filter [ip ip-filter-id]
qos policy-id
scheduler-policy scheduler-policy-name
ingress
filter [ip ip-filter-id]
qos policy-id [shared-queuing]
scheduler-policy scheduler-policy-name
multi-service-site customer-site-name
no shutdown
The following example displays the command usage to create an Fpipe SAP:
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# sap 1/2/1:16 create
A:ALA-41>config>service>fpipe>sap# ingress
A:ALA-41>config>service>fpipe>sap>ingress# qos 101
A:ALA-41>config>service>fpipe>sap>ingress# exit
A:ALA-41>config>service>fpipe>sap# egress
A:ALA-41>config>service>fpipe>sap>egress# qos 1020
A:ALA-41>config>service>fpipe>sap>egress# exit
A:ALA-41>config>service>fpipe>sap# no shutdown
A:ALA-41>config>service>fpipe>sap# exit
A:ALA-41>config>service>fpipe#
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# fpipe 1
A:ALA-42>config>service>fpipe# sap 2/1/1.1:16 create
A:ALA-42>config>service>fpipe>sap# ingress
A:ALA-42>config>service>fpipe>sap>ingress# qos 101
A:ALA-42>config>service>fpipe>sap>ingress# exit
A:ALA-42>config>service>fpipe>sap# egress
A:ALA-42>config>service>fpipe>sap>egress# qos 1020
A:ALA-42>config>service>fpipe>sap>egress# exit
A:ALA-42>config>service>fpipe>sap# no shutdown
A:ALA-42>config>service>fpipe>sap# exit
A:ALA-42>config>service>fpipe#