Alcatel-Lucent 7750 SR - Creating an Epipe Service

Virtual Leased Line Services
7750 SR OS Services Guide Page 253
Creating an Epipe Service
Use the following CLI syntax to create an Epipe service.
CLI Syntax: config>service# epipe service-id [customer customer-id] [vpn
vpn-id] [vc-switching]
description description-string
no shutdown
The following displays an Epipe configuration example:
A:ALA-1>config>service# info
-------------------------------------------
...
epipe 500 customer 5 vpn 500 create
description "Local epipe service"
no shutdown
exit
-------------------------------------------
A:ALA-1>config>service#