Alcatel-Lucent 7750 SR - Page 254

Page 254 7750 SR OS Services Guide
Configuring Epipe SAP Parameters
A default QoS policy is applied to each ingress and egress SAP. Additional QoS policies can be
configured in the config>qos context. Filter policies are configured in the
config>filter
context and explicitly applied to a SAP. There are no default filter policies.
Use the following CLI syntax to create:
• Local Epipe SAPs on page 255
• Distributed Epipe SAPs on page 257
Epipe SAP
CLI Syntax: config>service# epipe service-id [customer customer-id]
sap sap-id [endpoint endpoint-name]
sap sap-id [no-endpoint]
accounting-policy policy-id
collect-stats
description description-string
no shutdown
egress
filter {ip ip-filter-name | mac mac-filter-name}
qos sap-egress-policy-id
scheduler-policy scheduler-policy-name
ingress
filter {ip ip-filter-name | mac mac-filter-name}
match-qinq-dot1p {top|bottom}
qos policy-id [shared-queuing]
scheduler-policy scheduler-policy-name