Alcatel-Lucent 7750 SR - Common Configuration Tasks

Internet Enhanced Services
7750 SR OS Services Guide Page 883
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure IES
services and provides the CLI commands.
1. Associate an IES service with a customer ID.
2. Associate customer ID with the service.
3. Assign an IP address.
4. Create a subscriber interface (optional).
5. Create an interface.
6. Define SAP parameters on the interface
→ Select node(s) and port(s).
→ Optional — select QoS policies other than the default (configured in the config>qos
context).
→ Optional — select filter policies (configured in the config>filter context).
→ Optional — select accounting policy (configured in the config>log context).
7. Enable service.