Alcatel-Lucent 7750 SR - Table 9: Supported SAP Types

Virtual Leased Line Services
7750 SR OS Services Guide Page 255
Local Epipe SAPs
To configure a basic local Epipe service, enter the sap sap-id command twice with different port
IDs in the same service configuration.
By default, QoS policy ID 1 is applied to ingress and egress service SAPS. Existing filter policies
or other existing QoS policies can be associated with service SAPs on ingress and egress ports.
An existing scheduler policy can be applied to ingress and egress SAPs to be used by the SAP
queues. The schedulers comprising the policy are created at the time the scheduler policy is
applied to the SAP. If any orphaned queues (queues with a non-existent local scheduler defined)
exist on a SAP and the policy application creates the required scheduler, the status on the queue
becomes non-orphaned at this time.
Ingress and Egress SAP parameters can be applied to local and distributed Epipe service SAPs.
This example displays the SAP configurations for local Epipe service 500 on SAP 1/1/2 and SAP
1/1/3 on ALA-1.
A:ALA-1>config>service# epipe 500 customer 5 create
config>service>epipe$ description "Local epipe service"
config>service>epipe# sap 1/1/2:0 create
config>service>epipe>sap? ingress
config>service>epipe>sap>ingress# qos 20
config>service>epipe>sap>ingress# filter ip 1
config>service>epipe>sap>ingress# exit
config>service>epipe>sap# egress
config>service>epipe>sap>egress# qos 20
config>service>epipe>sap>egress# scheduler-policy test1
config>service>epipe>sap>egress# exit
config>service>epipe>sap# no shutdown
config>service>epipe>sap# exit
config>service>epipe# sap 1/1/3:0 create
config>service>epipe>sap# ingress
config>service>epipe>sap>ingress# qos 555
config>service>epipe>sap>ingress# filter ip 1
config>service>epipe>sap>ingress# exit
config>service>epipe>sap# egress
config>service>epipe>sap>egress# qos 627
config>service>epipe>sap>egress# scheduler-policy alpha
config>service>epipe>sap>egress# exit
config>service>epipe>sap# no shutdown
config>service>epipe>sap# exit
Table 9: Supported SAP Types
Uplink
Type
Svc SAP
Type
Cust.
VID
Access SAPs Network SAPs
L2 Null-star N/A Null, dot1q * Q.*
L2 Dot1q N/A Dot1q Q.*
L2 Dot1q-preserve X Dot1q (encap = X) Q1.Q2 (where Q2 = X)