Alcatel-Lucent 7750 SR - VPLS Clear Commands

Show, Clear, Debug Commands
Page 1706 7750 SR OS Services Guide
VPLS Clear Commands
id
Syntax id service-id
Context clear>service
clear>service>statistics
Description This command clears commands for a specific service.
Parameters service-id — The ID that uniquely identifies a service.
Values service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
arp-host
Syntax arp-host
arp-host { mac ieee-address | sap sap-id | ip-address ip-address[/mask] }
arp-host [port port-id] [inter-dest-id intermediate-destination-id | no-inter-dest-id]
arp-host statistics [sap sap-id | interface interface-name]
Context clear>service>id
Description This command clears ARP host data.
authentication
Syntax authentication
Context clear>service>id
Description This command enables the context to clear session authentication information.
capture-sap
Syntax capture-sap sap-id [trigger]
Context clear>service>id
Description This command clears the statistics for a particular capture SAP.