Alcatel-Lucent 7750 SR - Page 116

Ethernet Connectivity Fault Management (ETH-CFM)
Page 116 7750 SR OS Services Guide
exit
----------------------------------------------
The following example displays a Y.1731 configuration.
*A:sr7_A>config>eth-cfm# info
----------------------------------------------
domain 1 format none level 1
association 1 format icc-based name "1234567890123"
bridge-identifier 100
exit
ccm-interval 1
exit
exit
*A:sr7_A>config>service# info
----------------------------------------------
vpls 100 customer 1 b-vpls create
stp
shutdown
exit
sap 2/2/1:40 create
eth-cfm
mep 1 domain 1 association 1 direction up
ais-enable
priority 2
interval 60
exit
eth-test-enable
test-pattern all-ones crc-enable
exit
no shutdown
exit
exit
exit
no shutdown
exit
----------------------------------------------
Note: To be able to transmit and also receive AIS PDUs, a Y.1731 MEP must have ais-enable
set. To be able to transmit and also receive ETH-Test PDUs, a Y.1731 MEP must have eth-test-
enable set.