IES Service Configuration Commands
7750 SR OS Services Guide Page 1007
If sub-ident is not enabled on the SAP arp-reply-agent, subscriber identification matching is
not performed on ARP requests received on the SAP.
ARP requests are never forwarded back to the same SAP or within the receiving SAP’s split
horizon group.
profiled-traffic-only
Syntax [no] profiled-traffic-only
Context config>service>ies>sub-if>grp-if>sap>sub-sla-mgmt>single-sub
Description This command enables profiled traffic only for this SAP.
The no form of the command disables the command.
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy
Context config>service>ies>if>sap
config>service>ies>sub-if>grp-if>sap
Description This command creates the accounting policy context that can be applied to a SAP.
An accounting policy must be defined before it can be associated with a SAP.
If the policy-id does not exist, an error message is generated.
A maximum of one accounting policy can be associated with a SAP at one time. Accounting policies
are configured in the config>log context.
The no form of this command removes the accounting policy association from the SAP, and the
acccounting policy reverts to the default.
Default Default accounting policy.
Parameters acct-policy-id — Enter the accounting policy-id as configured in the config>log>accounting-policy
context.
Values 1 to 99
collect-stats
Syntax [no] collect-stats
Context config>service>ies>if>sap
config>service>ies>sub-if>grp-if>sap
Description This command enables accounting and statistical data collection for either the SAP, network port, or
IP interface. When applying accounting policies the data, by default, is collected in the appropriate
records and written to the designated billing file.
To Next Page
Loading...
