ETH-CFM Service Commands
Page 1046 7750 SR OS Services Guide
IPSec Gateway Commands
ipsec-gw
Syntax [no] ipsec-gw
Context config>service>ies>if>sap
Description This command configures an IPSec gateway.
default-secure-service
Syntax default-secure-service service-id ipsec-interface ip-int-name
no default-secure-service
Context config>service>ies>if>sap>ipsec-gateway
Description This command specifies a service ID or service name of the default security service used by this SAP
IPSec gateway.
Parameters service-id — Specifies a default secure service.
Values service-id: 1 — 2147483648
svc-name: An existing service name up to 64 characters in length.
default-tunnel-template
Syntax default-tunnel-template ipsec template identifier
no default-tunnel-template
Context config>service>ies>if>sap>ipsec-gateway
Description This command configures a default tunnel policy template for the gateway.
local-gateway-address
Syntax local-gateway-address ip-address
no local-gateway-address
Context config>service>ies>if>sap>ipsec-gateway
Description This command configures an ipsec-gateway local address.