Alcatel-Lucent 7750 SR - Page 1110

Configuring a VPRN Service with CLI
Page 1110 7750 SR OS Services Guide
VPRN BGP CLI Syntax
Use the CLI syntax to configure VPRN BGP parameters (BGP Configuration Commands on page
1154).
The following example displays a VPRN BGP configuration:
*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
ecmp 8
autonomous-system 10000
route-distinguisher 10001:1
auto-bind ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
scheduler-policy "SLA2"
qos 100
exit
egress
scheduler-policy "SLA1"
qos 1010
filter ip 6
exit
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-cel"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
spoke-sdp 2 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service#