Alcatel-Lucent 7750 SR - Page 1112

Configuring a VPRN Service with CLI
Page 1112 7750 SR OS Services Guide
VPRN RIP CLI Syntax
The following example displays a VPRN RIP configuration:
*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
ecmp 8
autonomous-system 10000
route-distinguisher 10001:1
auto-bind ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
scheduler-policy "SLA2"
qos 100
exit
egress
scheduler-policy "SLA1"
qos 1010
filter ip 6
exit
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-cel"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
rip
export "vprnRipExpPolCust1"
group "cel"
neighbor "to-ce1"
exit
exit
exit
spoke-sdp 2 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service# info
For more information about the RIP protocol, refer to the 7750 SR OS Router Configuration
Guide.