Alcatel-Lucent 7750 SR - Page 1176

VPRN Service Configuration Commands
Page 1176 7750 SR OS Services Guide
Parameters ip-prefix/prefix-length — Specifies the IPv4 prefix and prefix length.
Values ip-prefix: a.b.c.d (host bits must be 0)
ipv4-prefix-length: [0..32]
netmask — Specifies the netmask.
Values a.b.c.d (network bits all 1 and host bits all 0)
preference — Specifies the preference.
Values 1..255
metric — Specifies the metric.
Values 0..65535
enable|disable — Keyword; specifies the state of the static-route.
grt — Keyword; Global Route Table lookup.
gsmp
Syntax gsmp
Context config>service>vprn
Description This command enables the context to configure GSMP connections maintained in this service.
Default not enabled
group
Syntax [no] group name
Context config>service>vprn>gsmp
Description This command specifies a GSMP name. A GSMP group name is unique only within the scope of the
service in which it is defined.
Parameters name — Specifies the group name up to 32 characters in length.
ancp
Syntax ancp
Context config>service>vprn>gsmp>group
Description This command configures ANCP parameters for this GSMP group.