Alcatel-Lucent 7750 SR - Page 1178

VPRN Service Configuration Commands
Page 1178 7750 SR OS Services Guide
neighbor
Syntax [no] neighbor ip-address
Context config>service>vprn>gsmp>group
Description This command adds or removes a neighbor in this group.
Parameters ip-address — Specifies the IP address in dotted decimal notation.
local-address
Syntax local-address ip-address
no local-address
Context config>service>vprn>gsmp>group>neighbor
Description This command configures the source ip-address used in the connection towards the neighbor.
Parameters ip-address — Specifies the IP address in dotted decimal notation.
priority-marking
Syntax priority-marking dscp dscp-name
priority-marking prec ip-prec-value
no priority-marking
Context config>service>vprn>gsmp>group>neighbor
Description This command configures the type of priority marking to be used.
Parameters dscp dscp-name — Specifies the DSCP code-point to be used.
Values be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15, cs2,
cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31, cp27, af32, cp29, af33, cp31, cs4,
cp33, af41, cp35, af42, cp37, af43, cp39, cs5, cp41, cp42, cp43, cp44, cp45, ef, cp47, nc1,
cp49, cp50, cp51, cp52, cp53, cp54, cp55, nc2, cp57, cp58, cp59, cp60, cp61, cp62, cp63
prec ip-prec-value — Specifies the precedence value to be used.
Values 0 — 7
igmp
Syntax igmp
Context config>service>vprn
Description This command enables the context to configure IGMP parameters.
Default not enabled