Alcatel-Lucent 7750 SR - Page 1201

Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1201
Router L2TP Commands
l2tp
Syntax l2tp
no l2tp
Context config>service>vprn
Description This command enables the context to configure L2TP parameters. L2TP extends the PPP model by
allowing Layer 2 and PPP endpoints to reside on different devices interconnected by a packet-
switched network.
calling-number-format
Syntax calling-number-format ascii-spec
no calling-number-format
Context config>service>vprn>l2tp
Description This command specifies the L2TP calling number AVP.
Parameters ascii-spec — Specified as either char-specification or ascii-spec.
char-specification — Ascii-char | char-origin
char-origin — % origin
origin — S | r | s
Values S : system name, the value of TIMETRA-CHASSIS_MIB::tmnxChassisName
Values r : Agent Remote ID
Values s : SAP ID, formatted as a character string
exclude-avps
Syntax exclude-avps calling-number
no exclude-avps
Context config>service>vprn>l2tp
Description This command configures the L2TP AVPs to exclude.