Alcatel-Lucent 7750 SR - Page 1208

VPRN Service Configuration Commands
Page 1208 7750 SR OS Services Guide
default-group-interface
Syntax default-group-interface ip-int-name service-id service-id
no default-group-interface
Context config>service>vprn>l2tp>group>ppp
Description This command configures the default group interface.
Parameters ip-int-name — Specifies the interface name.
Values 32 chars max
service-id — Specifies the service ID.
Values 1..2147483648
svc-name — Specifies the service name (instead of service ID).
Values 64 chars max
keepalive
Syntax keepalive seconds [hold-up-multiplier multiplier]
no keepalive
Context config>service>vprn>l2tp>group>ppp
Description This command configures the PPP keepalive interval and multiplier.
Parameters seconds — Specifies in seconds the interval.
Values 10..300
multiplier — Specifies the multiplier.
Values 1..5
mtu
Syntax mtu mtu-bytes
no mtu
Context config>service>vprn>l2tp>group>ppp
Description This command configures the maximum PPP MTU size.
Parameters mtu-bytes — Specifies, in bytes, the maximum PPP MTU size.
Values 512..9212