Alcatel-Lucent 7750 SR - Page 1218

VPRN Service Configuration Commands
Page 1218 7750 SR OS Services Guide
Parameters time — Specifies the offer time.
Values minutes: 0 — 10
seconds 0 — 59
options
Syntax options
Context config>service>vprn>dhcp>server>pool
Description This command enables the context to configure pool options. The options defined here can be
overruled by defining the same option in the local user database.
Default none
custom-option
Syntax custom-option option-number address [ip-address...(up to 4 max)]
custom-option option-number hex hex-string
custom-option option-number string ascii-string
no custom-option option-number
Context config>service>vprn>dhcp>server>pool>options
config>service>vprn>dhcp>server>pool>subnet>options
Description This command configures specific DHCP options. The options defined here can overrule options in
the local user database.
The no form of the removes the option from the configuration.
Default none
Parameters option-number — specifies the option number that the DHCP server uses to send the identification
strings to the DHCP client.
Values 1 — 254
address ip-address — Specifies the IP address of this host.
hex hex-string — Specifies the hex value of this option.
Values 0x0..0xFFFFFFFF...(maximum 254 hex nibbles)
string ascii-string — Specifies the value of this option.
Values Up to 127 characters maximum.