VPRN Service Configuration Commands
Page 1222 7750 SR OS Services Guide
address-range
Syntax [no] address-range start-ip-address end-ip-address
Context config>service>vprn>dhcp>server>pool>subnet
Description This command configures a range of IP addresses to be served from the pool. All IP addresses
between the start and end IP addresses will be included (other than specific excluded addresses).
Default none
Parameters start-ip-address — Specifies the start address of this range to include. This address must be unique
within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the
range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
end-ip-address — Specifies the end address of this range to include. This address must be unique
within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the
range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
exclude-addresses
Syntax [no] exclude-addresses start-ip-address [end-ip-address]
Context config>service>vprn>dhcp>server>pool>subnet
Description This command specifies a range of IP addresses that excluded from the pool of IP addresses in this
subnet.
Default none
Parameters start-ip-address — Specifies the start address of this range to exclude. This address must be unique
within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the
range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
end-ip-address — Specifies the end address of this range to exclude. This address must be unique
within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the
range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
maximum-declined
Syntax maximum-declined maximum-declined
no maximum-declined
Context config>service>vprn>dhcp>server>pool>subnet
Description This command configures the maximum number of declined addresses allowed.
Default 64
Parameters maximum-declined — Specifies the maximum number of declined addresses allowed.
Values 0 — 4294967295
To Next Page
Loading...
