Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1251
icmp6
Syntax icmp6
Context config>service>vprn>interface>ipv6
Description This command configures ICMPv6 for the interface.
local-proxy-nd
Syntax [no] local-proxy-nd
Context config>service>vprn>interface>ipv6
Description This command enables or disables neighbor discovery on the interface.
neighbor
Syntax neighbor ipv6-address mac-address
no neighbor ipv6-address
Context config>service>vprn>interface>ipv6
Description This command configures IPv6-to-MAC address mapping on the interface.
Parameters ipv6-address — Specifies the IPv6 address on the interface.
Values ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0 — FFFF]H
d [0 — 255]D
mac-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
proxy-nd-policy
Syntax proxy-nd-policy policy-name [policy-name...(up to 5 max)]
no proxy-nd-policy
Context config>service>vprn>interface>ipv6
Description This command configures a proxy neighbor discovery policy for the interface.
Parameters policy-name — Specifies the existing policy name(s).