EasyManua.ls Logo

Alcatel-Lucent 7750 SR - Page 1295

Alcatel-Lucent 7750 SR
1948 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1295
aal5mux-ip — Routed IP encapsulation for VC multiplexed circuit as defined in
RFC 2684.
aal5snap-bridged — Bridged encapsulation for LLC encapsulated circuit (LLC/
SNAP precedes protocol datagram) as defined in RFC 2684.
aal5mux-bridged-eth-nofcs — Bridged IP encapsulation for VC multiplexed
circuit as defined in RFC 2684.
ingress
Syntax ingress
Context config>service>vprn>if>sap>atm
config>service>vprn>sub-if>grp-if>sap>atm
Description This command configures ingress ATM attributes for the SAP.
traffic-desc
Syntax traffic-desc traffic-desc-profile-id
no traffic-desc
Context config>service>vprn>if>sap>atm>egress
config>service>vprn>if>sap>atm>ingress
config>service>vprn>sub-if>grp-if>sap>atm>egress
config>service>vprn>sub-if>grp-if>sap>atm>ingress
Description This command assigns an ATM traffic descriptor profile to a given context (for example, a SAP).
When configured under the ingress context, the specified traffic descriptor profile defines the traffic
contract in the forward direction. When configured under the egress context, the specified traffic
descriptor profile defines the traffic contract in the backward direction.
The no form of the command reverts the traffic descriptor to the default traffic descriptor profile.
Default The default traffic descriptor (trafficDescProfileId. = 1) is associated with newly created PVCC-
delimited SAPs.
Parameters traffic-desc-profile-id — Specify a defined traffic descriptor profile (see the QoS atm-td-profile
command).

Table of Contents

Other manuals for Alcatel-Lucent 7750 SR

Related product manuals