Alcatel-Lucent 7750 SR - Page 1304

VPRN Service Configuration Commands
Page 1304 7750 SR OS Services Guide
sub-profile sub-profile-name — Specify this optional parameter to specify an existing subscriber
profile name to be associated with the static subscriber host. The subscriber profile is configured
in the config>subscr-mgmt>sub-profile context.
sla-profile sla-profile-name — Specify this optional parameter to specify an existing SLA profile
name to be associated with the static subscriber host. The SLA profile is configured in the
config>subscr-mgmt>sla-profile context.
frame-relay
Syntax frame-relay
Context config>service>vprn>if>sap
Description This command enables the context to configure Frame Relay parameters on the SAP.
frf-12
Syntax [no] frf-12
Context config>service>vprn>if>sap
Description This command enables the use of FRF12 headers.
The no form of the command disables the use of FRF12 headers.
ete-fragment-threshold
Syntax ete-fragment-threshold threshold
no ete-fragment-threshold
Context config>service>vprn>if>sap>frf-12
Description This command specifies the maximum length of a fragment to be transmitted.
The no form of the command reverts to the default.
Parameters threshold — Specifies the maximum length of a fragment to be transmitted.
Values 128 — 512
Default 0
interleave
Syntax interleave
no interleave
Context config>service>vprn>interface>sap>frame-relay>frf.12