Alcatel-Lucent 7750 SR - Page 1318

VPRN Service Configuration Commands
Page 1318 7750 SR OS Services Guide
static-host
Syntax static-host ip ip/did-address [mac ieee-address] [create]
static-host mac ieee-address [create]
no static-host [ip ip-address>] mac ieee-address>
no static-host all [force]
no static-host ip ip-address
Context config>service>vprn>if>sap
config>service>vprn>sub-if>grp-if>sap
Description This command configures a static host on this SAP.
Syntax ip ip-address — Specifies the IPv4 unicast address.
mac ieee-address — Specify this optional parameter when defining a static host. Every static host
definition must have at least one address defined, IP or MAC.
force — Specifies the forced removal of the static host addresses.
sla-profile sla-profile-name
This optional parameter is used to specify an existing SLA profile name to be associated with the
static subscriber host. The SLA profile is configured in the config>subscr-mgmt>sla-profile context.
ancp-string
Syntax ancp-string ancp-string
no ancp-string
Context config>service>vprn>if>sap>static-host
config>service>vprn>sub-if>grp-if>sap>static-host
Description This command specifies the ANCP string associated to this SAP host.
Parameters ancp-string — Specifies the ANCP string up to 63 characters in length.
app-profile
Syntax app-profile app-profile-name
no app-profile
Context config>service>vprn>if>sap>static-host
config>service>vprn>sub-if>grp-if>sap>static-host
Description This command specifies an application profile name.
Parameters app-profile-name — Specifies the application profile name up to 32 characters in length.